Skip to content
FREE UK Delivery on orders over £75*
FREE UK Delivery on orders over £75*

We Say

Plenty of cutting power without sacrificing the finish. F6.01 hits that useful middle ground where you can tackle visible swirls and scratches while leaving behind genuinely impressive gloss.

One of the biggest mistakes in paint correction is reaching straight for the most aggressive compound. Quite often, a good medium-cut polish is all you need, particularly when you're dealing with the wash marks, light scratches and general weathering that build up over time. Koch-Chemie Fine Cut F6.01 is designed for exactly that sort of work. With a manufacturer cut rating of 6/10, there's enough correction potential to make a meaningful improvement without automatically committing to a heavy cutting stage.

What makes F6.01 particularly interesting is its finishing ability. Koch-Chemie's aluminium oxide abrasives are designed to remove defects while producing a surprisingly refined gloss, and the results can be adjusted through pad choice and polishing technique. We'd start with a medium-cut foam polishing pad and assess the finish on a test spot. If the paint needs a little more refining afterwards, Koch-Chemie M3.02 Micro Cut is the natural next step. It's a combination that makes sense for anything from a straightforward enhancement detail to a more involved correction.

Key Features

Cut Level 6/10 (Manufacturer-rated correction)
Gloss Level 7/10 (Refined, high-gloss finish)
Defect Removal P2500 (Sanding marks and wash scratches)

Description

Koch-Chemie Fine Cut F6.01 is a silicone-oil-free machine polishing compound developed for correcting medium to heavily weathered automotive paintwork. Its advanced aluminium oxide abrasive technology is designed to remove wash-induced scratches, signs of wear and sanding marks left by P2500 abrasive media, while restoring clarity and a deep gloss to the finish.

With a cutting grade of 6/10 and a gloss rating of 7/10, F6.01 offers a useful balance between defect removal and paint refinement. The polishing performance can be adjusted through the choice of pad, machine speed and applied pressure, making it suitable for a range of correction requirements. Its formulation is also developed for use on scratch-resistant paint systems.

For best results, Koch-Chemie recommends pairing F6.01 with a Fine Cut Foam Pad or suitable lambswool polishing pad. The polish is worked across the prepared surface using controlled overlapping passes, progressively reducing pressure to refine the finish. If any remaining holograms or polishing marks require attention, follow with Koch-Chemie Micro Cut M3.02. Available in 250ml and 1-litre bottles.

Specification

More Information
Abrasive Technology Aluminium oxide
Application Machine polishing
Cut Level 6/10
Defect Removal Wash scratches, weathering and P2500 sanding marks
Gloss Level 7/10
Product Codes 405250 (250ml) / 405001 (1L)
Sizes 250ml and 1 litre
Silicone Oil None

How To Use

  1. Prepare the paintwork

    Thoroughly wash, decontaminate and dry the vehicle. Inspect the paintwork and carry out a test spot to establish a suitable polishing combination. Do not use on hot surfaces.

  2. Choose your polishing pad

    Select a Koch-Chemie Fine Cut Foam Pad or compatible lambswool pad, depending on the correction required. Ensure the pad is clean, correctly centred on the backing plate and suitable for your polishing machine.

  3. Work the polish

    Shake the bottle and apply an appropriate amount of F6.01 to the pad. Polish the prepared surface using overlapping crosswise passes. Koch-Chemie specifies a maximum of 2,000rpm for its rotary polishing method. Begin with greater pressure at a lower speed, then gradually reduce pressure and refine the finish at a higher speed, within the machine manufacturer's recommendations.

  4. Inspect the correction

    Remove the remaining polish residue with a suitable clean microfibre towel and inspect under appropriate lighting. Repeat or adjust the polishing combination if required, taking care to preserve sufficient paint thickness.

  5. Refine and protect

    If necessary, follow with Koch-Chemie Micro Cut M3.02 to remove remaining holograms or fine polishing marks. Once the finish is satisfactory, prepare the surface as required before applying your chosen paint protection. Clean polishing pads thoroughly after use.

Safety Data

Before using Koch-Chemie Fine Cut F6.01, please read the manufacturer's safety information and follow the recommended handling, storage and protective measures.

View Manufacturer Product Information and Safety Data Sheet

Customer Reviews