We Say
Gtechniq C1 is extremely easy to apply and ideal for someone new to applying ceramic coatings, or for someone who wants a coating that is durable, but not too much hassle to apply. Whilst C1 is a very good stand alone coating it is complimented perfectly by being over coated with EXO v4 or C2 v3 Liquid Crystal to boost hydrophobicity.
Key Features
Beading8/10(Compared To Others)
Durability60 Months(Up to)
Protrction10/10(Compared To Others)
Description
Gtechniq C1 Crystal Lacquer is an easy to apply ceramic coating so is perfect for someone new to ceramic coatings. C1 forms a hard layer on the paintsurface which is slick and hydrophobic. Preventing from light scratching (such as marring from washing and drying) and a surface which repels dirt and water with ease. Can be used as a stand alone coating or with EXO v4 or C2 v3 as a top layer to boost hydrophobicity.
Specification
| Adds Protection | Yes |
|---|---|
| Application Method | By hand only |
| Beading |
|
| Durability | Up to 60 Months |
| Emits Strong Fumes | Yes |
| Enhances Gloss | Yes |
| Flake Pop |
|
| Glossiness |
|
| Hardness |
|
| Layerable | Yes (allow 4 hours between coats) |
| Recommended For | All paint types and colours |
| Reflectivity |
|
| Scratch Resistant | Yes |
| Slickness |
|
| Trim-Safe | No |
How To Use
(i) It’s important to note that Crystal Serum Light must be applied indoors and the vehicle must remain indoors for at east 12 hours after application.
(ii) Vehicle must be fully cleaned and decontaminated before application and if required, polish the paintwork by machine or hand to remove imperfections. Give the car a wipe down with Gtechniq Panel Wipe to ensure any oils or residues are removed from the surface.
(iii) Soak the provided application pad with C1.
(iv) Spread evenly onto a small panel around 2ft x 2ft using an overlapping motion.
(v) Immediately remove residue with a clean microfibre towel always remembering to remove further than the applied area to ensure all excess is removed.
(vi) Do not buff with excess force. Inspect area to ensure all residue is removed before moving on.