We Say
BLACKFIRE Paint Cleaner is without any doubt one of the best paint preparation products currently on the market, and kills two birds with one stone. Firstly, it deeps cleans painted surfaces, flushing out deep-seated grime and stripping away old protective residues. Secondly, it lays down fillers and heavy gloss enhancing agents that mask minor defects and impart an insanely wet-looking finish. So wet in fact, that you'd almost swear blind you could reach down into it. In summary, BLACKFIRE Paint Cleaner is an excellent product that effortlessly transforms the appearance of paint and prepares it perfectly for the addition of sealant or wax protection.
Key Features
Cleaning Strength6/10(Compared To Others)
Enhances GlossYes(Via Glazing Oils)
Filling Power6/10(Compared To Others)
Description
BLACKFIRE Paint Cleaner is a non-abrasive paint cleaner and glaze that does away with the need for separate cleansing and glazing steps. It is designed to mask minor defects (such as wash marring and fine swirl marks) and dramatically enhance gloss in order to create the illusion that paint is dripping wet ahead of an application of sealant or wax protection. During the application process, potent chemical cleaners strip away residual grime and old layers of protection, while kaolin clay particles and other glazing agents visually reduce the extent of wash marring and minor swirl marks by filling such defects and robbing sunlight of sharp edges to reflect off of.
Specification
| Adds Protection | No |
|---|---|
| Chemical Basis | Water-based |
| Cleaning Strength | |
| Contains Abrasive Particles | No |
| Contains Chemical Cleaners | Yes |
| Contains Fillers And Glazing Oils | Yes |
| Enhances Gloss | Yes |
| Filling Power | |
| Size | 946 ml |
| Suitable For Hand Use | Yes |
| Suitable For Machine Use | Yes |
How To Use
BLACKFIRE Paint Cleaner can be applied equally well by hand or dual action machine. By hand, it should be applied to freshly decontaminated paint one panel at a time using a Meguiar's Even Coat Microfiber Applicator Pad. Only 3-4 pea-sized drops of product are required per panel, and these should be worked in well in an overlapping fashion until only a thin film remains. The film should then be buffed off immediately using a PB Super Buffing Towel. By dual action polisher, BLACKFIRE Paint Cleaner should be applied using a Gyeon Q²M Eccentric Finishing Pad. Only 3-4 pea-sized drops of product are required per panel, and these should be worked in thoroughly at around 3000-4000 orbits per minute (speed 3-4 on most dual action machine polishers) until only a thin film remains. This film should then be buffed off immediately using a PB Super Buffing Towel.