We Say
The Active™ Premium Pressure Washer 20° Lance is one of the most practical “small upgrades” you can make to a wash setup. That angled tip changes how you work around a vehicle: wheel wells, arches, sills, lower bumpers and awkward rinse angles become far easier without twisting your wrist or dragging your hose into paintwork.
It’s built properly too — a rigid 304 stainless rod for strength and corrosion resistance, plus a durable nylon handle that stays comfortable and grippy in wet conditions. If you’re trying to refine your rinse technique (especially on tighter UK driveways or when working around bikes and patio areas), this lance gives you noticeably better control and direction.
For a tidy, high-end setup, pair it with the Active Premium Swivel Pressure Washer Gun and store everything neatly on the Active Hose Reel & Wall Mount.
Key Features
Bend Angle20°(Access hidden areas)
Length20.5"(Rigid stainless rod)
Peak Rating5000 PSI(45 L/pm, 150°C)
Description
The Active™ Premium Pressure Washer 20° Lance is a precision-engineered angled lance designed to improve wash direction, reach and control when pressure washing vehicles and hard surfaces. Featuring a rigid 20.5" 304 stainless steel rod and a durable nylon handle, it helps you target awkward areas such as wheel wells, undercarriage edges, sills, bumpers, patios and other hard-to-reach surfaces without contorting your wrist or overworking your hose management.
Built to industry-spec quick-connect standards, it uses a 1/4" male QC inlet and 1/4" female QC outlet for fast, reliable compatibility with modern detailing setups. It’s rated up to 344 bar / 5000 PSI, supports flows up to 45 L/pm / 12 Gal/pm, and is heat-resistant up to 150°C, making it suitable for a wide range of electric and petrol pressure washers and even hot-water capable systems.
Complete your wash system with the Active Premium Foam Cannon for thick pre-wash coverage, and pair with the Active 15M Rubber Pressure Washer Hose for a flexible, kink-resistant setup.
Specification
| Rod Construction | 304 stainless steel |
|---|---|
| Handle Construction | Nylon |
| Inlet | 1/4" male QC |
| Outlet | 1/4" female QC |
| Bend Angle | 20° |
| Lance Length | 20.5" |
| Peak Pressure | 344 bar / 5000 PSI |
| Water Flow | 45 L/pm / 12 Gal/pm |
| Max Temperature | 150°C / 300°F |
| Min Temperature | 5°C / 40°F |
How To Use
Connect the lance to your pressure washer gun using the 1/4" quick-connect system (1/4" male QC inlet to gun outlet). Ensure the fitting fully seats and locks before pressurising the system.
Use the 20° bend to reach wheel wells, arches, lower sills and underbody edges without twisting your wrist. Start with a safe distance and widen your stance around the vehicle so the hose stays clear of paintwork.
After use, depressurise the system, disconnect, and store dry. For the smoothest hose management, pair with the Active Premium Swivel Pressure Washer Gun and mount your setup using the Active Hose Reel & Wall Mount.