We Say
A compact gear head, carefully controlled power and a durable four-metre cable. The PE 14-3 125 is built for detailers who spend real time behind a rotary.
The FLEX PE 14-3 125 combines a robust 1400W input motor with the kind of ergonomic details that matter during longer correction sessions. A rotary polisher delivers direct pad rotation, so it can make efficient progress on heavier defects in experienced hands, but it also demands careful control of heat and pressure.
One of this machine's most useful features is its flatter gear-head design. Keeping the head closer to the panel helps the machine feel more manageable when working around awkward areas. The soft-start accelerator trigger lets you bring the pad up to speed progressively rather than starting abruptly.
FLEX's electronic controls are designed to maintain speed under load and provide overload, restart and temperature protection. Those safeguards are welcome on a tool intended for repeated polishing work, although they are no substitute for sensible pad selection and technique.
The flexible four-metre PUR cable is another practical touch. We would choose this model for controlled rotary correction on larger panels and curved areas, paired with a suitable backing plate and a polishing combination matched to the paint.
Key Features
Power Input1400W(880W rated output)
Speed Range1100–3700(No-load rpm)
Cable4M(Flexible PUR cable)
Description
The FLEX PE 14-3 125 is a mains-powered rotary machine polisher designed for paint correction and refinement with appropriately sized backing plates and pads.
Its low-profile gear head, progressive trigger and variable-speed electronics help the operator work with more deliberate control. The machine is supplied without a polishing backing plate or pad, so those should be selected separately for the intended task.
Why you'll love it:
✓ 1400W input motor with 880W stated output
✓ 1100–3700 rpm no-load speed range
✓ Variable-speed control and progressive accelerator trigger
✓ Electronic speed regulation and protective functions
✓ Low-profile gear head for improved access
✓ Flexible 4m PUR power cable
✓ Suitable for backing plates up to 125mm
✓ Backing plate and polishing pad not supplied
Specification
| Power Input | 1400W |
|---|---|
| Power Output | 880W |
| No-load Speed | 1100–3700 rpm |
| Maximum Backing Plate | 125mm (not included) |
| Maximum Polishing Pad | 150mm (not included) |
| Cable | 4m PUR |
| Dimensions | 375 × 84 × 120mm |
| Weight | 2.2kg |
How To Use
1) Prepare the paintwork:
Wash, decontaminate and dry the vehicle. Inspect the paint and protect sensitive trims and edges as required.
2) Select the right accessories:
Fit a compatible backing plate and pad, then choose a compound or polish suitable for the paint condition. Check the manufacturer's instructions and any kit-specific contents.
3) Start at a controlled speed:
Apply a modest amount of polish to the pad. Begin at low speed to spread the product, with the pad positioned carefully on the panel.
4) Work in manageable sections:
Keep the pad moving evenly with controlled pressure. Monitor paint temperature, pad condition and product residue, especially near edges and raised body lines.
5) Inspect and refine:
Wipe away residue with a clean microfibre cloth and check the result under suitable lighting. Repeat or refine with a less aggressive combination if necessary.
Important Notes:
✓ Rotary machines use direct pad rotation and require suitable technique
✓ Always use the appropriate backing plate, pad and polish combination
✓ Monitor heat and avoid lingering over edges or sensitive paint
✓ Disconnect mains machines or remove batteries before accessory changes
✓ Follow the manufacturer's operating and safety instructions
Product Information
This is an electrical machine polisher, not a chemical preparation. It does not require a chemical Safety Data Sheet for the machine itself.
Backing plate and polishing pad are not included. Select compatible accessories before first use.
Read the supplied manufacturer instruction manual before use. Follow electrical and battery safety guidance, as applicable, and check the safety information for any polishes or compounds used with the machine.