Skip to content
FREE UK Delivery on orders over £75*
FREE UK Delivery on orders over £75*

We Say

Not every paint correction job calls for an aggressive cutting pad. Sometimes a well-matched medium foam and polish combination is all you need to restore clarity and tackle those everyday swirls.

Choosing the right polishing pad is every bit as important as choosing the compound. Too aggressive and you risk doing more correction than necessary; too soft and you can spend ages chasing defects. The Koch-Chemie Fine Cut Foam Pad sits in that useful middle ground, offering enough bite for moderate scratches, weathering and swirl marks without immediately reaching for a heavy cutting combination. It's designed to work particularly well with Koch-Chemie F6.01 Fine Cut Compound.

What we like about Koch-Chemie's foam pad system is the attention to how the pad actually behaves on the machine. At just 25mm thick, the Fine Cut Pad feels like a sensible design for maintaining control, while its open-cell construction and shaped edge help it work around panel contours. It's the sort of pad we'd consider for a one-stage correction on suitable paintwork or as a refining step after heavier compounding. As always, a quick test spot will tell you whether the combination provides the correction and finish you're looking for.

Key Features

Cutting Grade MEDIUM (Moderate scratches and weathering)
Pad Thickness 25MM (Low-profile construction)
Foam Structure OPEN CELL (Optimised foam density and structure)

Description

Koch-Chemie Fine Cut Foam Pad is a medium-abrasive machine polishing pad developed for removing moderate paint defects, scratches and weathering when used with a suitable Fine Cut polishing compound. Its specially formulated foam provides consistent compression resistance throughout the polishing process, helping maintain predictable correction performance.

The pad features a 25mm low-profile design that reduces torsional forces and improves stability during machine polishing. Its optimised open-cell structure and foam density support effective polishing performance, while the precision-milled outer edge provides additional flexibility when working around curved panels and bodywork contours.

A colour-coded hook-and-loop backing helps identify the pad within the Koch-Chemie polishing system. Available in 76mm, 126mm and 150mm diameters, with a separate five-pack of 45mm pads for smaller polishing areas. For best results, pair with Koch-Chemie F6.01 Fine Cut Compound, selecting the appropriate pad size for your machine and backing plate. Further options are available in our polishing pads collection.

Specification

More Information
Backing Colour-coded hook-and-loop
Construction Low-profile foam with milled edge
Cutting Grade Medium
Foam Structure Open cell
Pad Thickness 25mm
Product Codes 9998313 / 9998314 / 9998315 / 9998328
Recommended Polish Koch-Chemie Fine Cut F6.01
Sizes 76mm, 126mm, 150mm; 45mm pack of 5

How To Use

  1. Prepare the paintwork

    Thoroughly wash and decontaminate the vehicle as required. Ensure the surface is clean and dry before polishing. Inspect the paintwork and identify a suitable test area.

  2. Fit the polishing pad

    Select the correct pad size for your machine and backing plate. Attach it centrally and securely, checking that the foam is clean and free from damage or trapped contamination.

  3. Apply the polish

    Apply a suitable amount of Koch-Chemie Fine Cut F6.01 or another compatible polish. Spread the product across a manageable working area, then polish using the machine speed, pressure and technique recommended by the machine and polish manufacturers.

  4. Inspect and refine

    Remove polishing residue with a clean microfibre towel and inspect the finish under suitable lighting. Adjust the pad and polish combination if necessary. For further refinement, consider a suitable finishing polish and softer pad.

  5. Clean and maintain

    Remove accumulated polish residue from the pad regularly during use. After polishing, wash the foam by hand with a suitable pad cleaner, rinse thoroughly and allow it to dry completely before storage.

Customer Reviews