We Say
Plenty of bite without going straight to the most aggressive pad in the range. A very useful choice for more demanding paint correction.
It's tempting to reach for the most aggressive pad whenever you're faced with heavily swirled paintwork, but there's often a better balance to be found. The ShineMate T80 Yellow sits just below the Green T120 in the brand's flat-face foam range, offering substantial cutting ability without automatically stepping up to the firmest foam available. We'd consider it for paintwork showing significant wash marring, oxidation or more stubborn defects where a conventional medium polishing pad isn't quite enough.
What makes the T80 appealing is its versatility within a proper correction process. Pair it with a capable cutting compound and it can deal with serious defects, but change the polish and the results can be quite different. The flat-face design also provides a broad, consistent working surface, making it suitable for both dual action and rotary machines. As always, we'd begin with a test spot rather than choosing a pad purely by its colour. If the paint needs something more aggressive, there's always the T120, but the T80 is a sensible place to start.
Key Features
Description
ShineMate T80 Yellow High Cut Foam Pad is a high-cutting flat-face polishing pad developed for removing substantial paint defects during machine polishing. Positioned below the more aggressive T120 Green in ShineMate's foam range, it provides an effective balance of correction capability and polishing control when used with a suitable abrasive compound.
The T80's cutting foam is designed to tackle deep scratches, overspray, severe swirl marks, heavy oxidation and sanding marks, including those left by P1500 sanding discs. Actual defect removal depends on the paint system, remaining coating thickness, compound and polishing technique. Its flat polishing surface provides consistent contact with the paintwork, helping the compound work evenly across the panel.
Suitable for both rotary and dual action polishing machines, the T80 can be used for more demanding correction work on automotive paint finishes. ShineMate's flat-face foam construction is designed to maintain consistent cutting performance and withstand the heat and cleaning associated with normal machine polishing.
Available manufacturer sizes:
✓ 100 × 25mm, Product Code 34124-1
✓ 150 × 25mm, Product Code 34126-1
✓ 180 × 25mm, Product Code 34127-1
The T80 is a high-cut foam pad rather than a dedicated finishing pad. Depending on the hardness and condition of the paintwork, a subsequent refining stage using a softer polishing pad and finer polish may be required to achieve maximum gloss and clarity.
Specification
| Application | High-cut paint correction and compounding |
|---|---|
| Cutting Grade |
|
| Foam Grade | T80 Yellow High Cut |
| Machine Compatibility | Dual action and rotary polishers |
| Pad Design | Flat-face cutting foam |
| Pad Thickness | 25mm |
| Product Codes | 34124-1 / 34126-1 / 34127-1 |
| Sizes | 100mm, 150mm and 180mm |
How To Use
-
Prepare the paintwork
Thoroughly wash, decontaminate and dry the vehicle. Inspect the paintwork under suitable lighting and assess the defects requiring correction. Check paint condition and available film thickness where appropriate.
-
Select the pad and compound
Choose the T80 size appropriate for your machine and backing plate. Pair it with a suitable cutting compound, starting with a test spot to determine the least aggressive combination required for effective defect removal.
-
Prepare the polishing pad
Attach the pad centrally to the backing plate and check that it is securely fitted. Apply the polishing compound according to the manufacturer's instructions, priming the foam where required.
-
Carry out the correction
Work over manageable sections using controlled, overlapping passes. Follow the polishing machine and compound manufacturers' speed recommendations, avoiding excessive pressure and monitoring the temperature of both the pad and panel.
-
Inspect and refine
Remove the polishing residue using a clean microfibre towel and inspect the finish under suitable lighting. Where necessary, follow the cutting stage with a softer polishing pad and a finer finishing polish to remove remaining haze.
-
Clean and store
Remove the pad after use and clean it with a suitable polishing pad cleaner. Rinse thoroughly, allow it to dry completely and store away from dust and contamination.